Heat riser question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 19, 2004
Threads
18
Messages
123
Location
Colorado
I have a 1978 FJ40 with the stock exhaust manifold.
The heat riser moves freely and I can hear the flapper inside moving.
The problem is, the weight thingy does not change position when hot.
I think it is always directing heat towards the intake (hot position) and cooking my carb.
How can I tell if it is in the "cold" position or the "hot" position
The flat part of the weight is always verticle.

Thanks.
 
Sounds like the bimetalic spring is off, broken or missing.

I'm not sure about your manifold, but mine has stops for the counterweight marked "C" and "H" for cold and hot. (or maybe W for warm. forget. :) )
 
Back
Top Bottom