Headlights turned on by themselves

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 16, 2012
Threads
40
Messages
2,612
Location
Elko, NV
So my 80 has been parked for a few weeks without touching it. Yesterday the headlights turned themselves on by their own volition. No tail lights, no dome lights, no dash lights. I've disconnected the batteries for now. I had real weird problems with the headlights before when I first bought it. I started going through wiring and pulled out the Slee headlight harness that was in it and the headlights would not work on the factory harness. Put it all back in and everything worked normal and it's been that way since.

Anyway, nothing else weird going on that I know of. Any thoughts on how this is possible? I've got nothing.
 
Probably demonic posession. Pretty common this time of year.

With the Slee setup, I believe the headlights are on relays. The relays turn on when your headlight switch grounds them. If the relays are going on by themselves, it means there's a short to ground somewhere. Perhaps a mouse chewed through one of the wires or something?
 
I was going to ask about a relay harness but since you mentioned it, great.

Do you own a multimeter or even make a test light?

The harness as mine was built some 12+ yrs ago simply used the headlight socket to trigger the relays, pretty basic.

I'm going to bet the trigger wire took a nick on some sheetmetal, or a relay got stuck & you shifting wires & bumping the relays probably fixed it.

FWIW, I had an issue with the trigger wire socket/interface with the stock headlight bulb socket, so I cut off the Slee socket & added shielded spades & T -tap terminals to the main headlight harness, fixed an intermittent issue I had. Stuffed a little white lithium grease in the connection & been great for a long time.
 
Thanks guys. I started playing with the harness and I was able to get them to turn off without unplugging it but a little later they came back on. I'll inspect the wires and replace the relays. I do have a DMM but I just couldn't imagine how the relays would excite themselves but makes more sense if they're controlled via ground.
 
Back
Top Bottom