Headlight washers going crazy!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 6, 2007
Threads
352
Messages
3,413
Location
San Juan Puerto Rico
Website
www.facebook.com
Today I replaced the windshield washer pump an replaced the hose that goes from the pump to the headlight washers. As soon as the water started to flow, one of the headlight washers began gushing water, even when it was not to be pumping, it drained the system. This one pumps water like a fire hose, it was so strong that got the windshield wet, the other one seems to be clogged. Anyone had this problem?:confused: DSC00279.webp
DSC00279.webp
 
Last edited:
My two 80's have them. I started working on one the get them working, I already hit the classifieds to see if I'm lucky, I need the two washer nozzles, but it seems that on the stateside Cruisers this is a rare.:hhmm:
 
Mot sent me a new nozzle assembly when I broke one.
 
My two 80's have them. I started working on one the get them working, I already hit the classifieds to see if I'm lucky, I need the two washer nozzles, but it seems that on the stateside Cruisers this is a rare.:hhmm:

Yeah i've never seen them on one in the US
Wonder how hard it would be to source some.... would've come in handy a few weeks ago.
 
My first Post !!!

Jose, the reason your washers keep sqwirting water in because the check valve is broken so the spring inside is letting water to flow. The same happened with mines. It uses one check valve on each nozzle. Since I used to have a Montero I bought two check valves thinking it was just like the LC but in the Montero is a "T" check valve so I used to my LC. Just order that check valve for the Montero and get rid of the ones from the LC and voilà.
 
x2 on the jammed check valve. it might be filled with water deposits. my japanese rig has that same headlight washer. use it occasionally to keep it working. my windshield wiper also gets jammed because of water deposits. all i have to do is prick the outlet with a small needle then blow compressed air into it. try blowing compressed air from the hose going to the washers
 
I wonder how expensive it would be to add headlight washers to a US spec truck. Obviously there is more to it than the two nubs.

So, does anyone know what parts and what all is involved in adapting them out?
 
I wonder how expensive it would be to add headlight washers to a US spec truck. Obviously there is more to it than the two nubs.

So, does anyone know what parts and what all is involved in adapting them out?

Grench,

You can hit OpenX and let me know the PN's and I would be more than happy to find out for ya. :grinpimp:
 
Grench,

You can hit OpenX and let me know the PN's and I would be more than happy to find out for ya. :grinpimp:

Go to a junkyard and find a 90's Montero SR, most of the parts if not all, fit.
 
I think you 'non-us spec' cruiserheads start these threads, not because you have an issue, but to make the 'us-spec' parts geeks go nuts over stuff we don't have.
 
I think you 'non-us spec' cruiserheads start these threads, not because you have an issue, but to make the 'us-spec' parts geeks go nuts over stuff we don't have.

I don't know about the others, but prfjcruiser and mine are US specs.:hhmm:
 
I think you 'non-us spec' cruiserheads start these threads, not because you have an issue, but to make the 'us-spec' parts geeks go nuts over stuff we don't have.

Hehehehe. I can take a picture from the hood label saying that "The vehicle comforms to US federal regulations (blah blah) to a 1992 year vehicle". But indeed there's an issue about these washers and its very common to break. I had a Mitsubishi Montero with the same problem.
 
Back
Top Bottom