Headlight issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 28, 2020
Threads
9
Messages
20
Location
chalotte nc
My driver side headlight harness is cracked and when I place the headlight in the harness it isn’t tight due to the plastic trim around it being cracked. How I can fix this issue and what’s the correct term for this piece.

sorry for the confusion
 
If I understand correctly and the harness that the bulb connects to is damaged maybe you can consider replacing it. I forget what bulb we have up there but you can cut and splice in a new harness.

Don't take my word for it, look a bit closer but I would think this is a possible solution/
 
My driver side headlight harness is cracked and when I place the headlight in the harness it isn’t tight due to the plastic trim around it being cracked. How I can fix this issue and what’s the correct term for this piece.

sorry for the confusion
Do you mean the socket that plugs on to the prongs of the bulb? If so this may be of help. If not then perhaps you could take a photo of the 'cracked plastic trim', so that the part can be identified.

Screenshot 2021-02-23 at 17.33.52.png


Screenshot 2021-02-23 at 17.33.39.png
 
Do you mean the socket that plugs on to the prongs of the bulb? If so this may be of help. If not then perhaps you could take a photo of the 'cracked plastic trim', so that the part can be identified.

View attachment 2594015

View attachment 2594016
It’s the bulb that goes in the slot with the metal pin you have to release in order to pull the bulb out. I believe it’s a h1 bulb but the female section that the bulb prong goes into.
 
Back
Top Bottom