Headers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 27, 2006
Threads
10
Messages
57
Location
Philadelphia
Website
www.nightmareone.com
Please someone help me out....I have desmogged it but have no idea what i can leave out. I also need to block off some ports i believe. Any help would be greatly appreciated. Can anyone post photos of an engine with headers on it? Particularly a late model Fj-40. I want to get a good view of what i can leave off. Much appreciated for helping me to finish a 5 year restoration project. My nightmare for many years is starting to become a dream come true. If anyone can also tell me what i can leave off when putting headers on that would be great as well. I have obviously removed all the smog junk, but those vacuum hoses....everywhere!
 
Last edited:
Here is a late '74 with a 2F intake and the SOR 2-piece. HTH
ED
2F 014.webp
 
Degnol said:
Here is a late '74 with a 2F intake and the SOR 2-piece. HTH
ED


Degnol,
Do they make a heat shield to help keep your intake charge cool for that setup???
 
Rice, I could have used the OEM heat shield, but, so far it is not a problem. I think that would be a help if I needed it. As you can see, I run a fluid intake heater. Did I answer your question?

ed
 
Degnol said:
Rice, I could have used the OEM heat shield, but, so far it is not a problem. I think that would be a help if I needed it. As you can see, I run a fluid intake hearer. Did I answer your question?

ed

Yep. I saw the fluid lines (a real clean set-up by the way), but figured a shield would be good for another half a HP. (The general rule we follow for Chevies and Fords is a 1% loss in HP for every 11* rise in intake temp. )
 
The main reason, maybe short-sighted, was that the heat shield interfered with my carb linkage. I know I coulda cut and modified it, but I didn't. I could easily fab something to work, though.
Good question.

Ed
 
Degnol said:
The main reason, maybe short-sighted, was that the heat shield interfered with my carb linkage. I know I coulda cut and modified it, but I didn't. I could easily fab something to work, though.
Good question.

Ed

Regardless, very nice cruiser. It's easy on the eyes.

Thanks
 
Tanks, that is a compliment coming from you.:)

Ed
 
Rice don't let Ed fool you...thats not fluid intake heater...oh no...Ed's running a CO2 charged intake cooler there ;) He just tells everone it a fluid intake heater.
 
toddslater said:
Rice don't let Ed fool you...thats not fluid intake heater...oh no...Ed's running a CO2 charged intake cooler there ;) He just tells everone it a fluid intake heater.



Those lines hook up to a nitrous tank from my office;)


CO2.......................................why bother?


Ed:D
 
You are a very...very baad man Ed :grinpimp: CO2 to make the NO charge even denser in your intake ...like me :bounce:

Anywho, looking back at Jakes ?...I think we dropped the ball on helping. :frown: Sooo as far as just hooking up headers to your late model 2F 40....I am a little cornfused.

Year would helpful, but it seems your head is spinning with all the vacuum hoses...IIRC none of which are involved with the previous ex manifold...so not to be involved with the header. You have various places on the intake/carb/VSV etc... area that have vac hoses...but we'll need the year and what you've done thus far to be able to throw our highly suspect opinions at.
 
I have the headers on as well as the intake and carb. All just bolted on at the moment and nothing hooked up to it. I have the Egr block off coming from man-a-fre. With regard to that, is that all i need to block off? As to the year, it is an 81.
 
Back
Top Bottom