HDJ81 sway bars installed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2006
Threads
89
Messages
1,102
Location
Abbotsford, B.C.
Thanks to Sheldon and Greg, I got a pair of sway bars put back on my HDJ81. The truck came from Japan with both bars removed. I should have done this when I first got the truck. It's almost like driving a different truck now. Very little body roll at all. Anyone that needs to deal with this company should be very happy. They were both extremely helpful, and I highly recommend them.
 
hey there, i got an hdj81 without sway bars, can you please post their info, or company info?, i need sway bars myself. thank u in advance.
 
G&S cruiser parts. Only thing is the JDM brackets on the front end aren't strong enough for the thicker US bars, so you will either need to fabricate some yourself or have it done for you. I used ATEB. Hope that helps.
 
Holy cats, I can't believe you got your federal inspection without sway-bars! Did you go to Canadian Tire?

I brought two Crown Vics in from the US in 2004, and I got raked over the coals for stupid stuff like a burned-out license plate light, a bald spare tire, and a loose door-handle.


Someone I know imported a 5-ton cargo truck and got a "fail" because the paint on the box was peeling; the inspector considered that to be a non-pass for body integrity :rolleyes:.
 
hey there, i got an hdj81 without sway bars, can you please post their info, or company info?, i need sway bars myself. thank u in advance.

We have a complete front/rear swaybar set available. We just pulled em off an HDJ81. PM me or email to info@gscruiserparts.com if you are interested.

Sheldon
 
i got them, thanks G&S. it was a breeze. it took me maybe 2 hours to install them both.....thats incliding the time to remove the seized/striped bolts. what a diference in handling. now to create some quick disconects.
 
Back
Top Bottom