Harmonic balancer bolt.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2015
Threads
5
Messages
22
Location
Las Vegas NV
The one bolt that gave me a hard time on my tear down was that one little guy. My older impact gun wouldn't budge it and the starter trick wasn't an option because the head was already removed. So after some thinking I made a tool that bolted into the balancer and braced on the passenger side frame rail. That allowed me to steady the crank to get enough leverage to crack it loose. I know a few people have done this but I couldn't find it anywhere. So I wanted to post it for anyone running into this same problem. The handle is 18" long.
ImageUploadedByTapatalk1454020026.496281.webp




Sent from my iPhone
 
You have something there. If you made a few I bet they would sell for, if nothing else, a hold down tool to torque the bolt. You probably aren't busy and have nothing else going on


...via IH8MUD app
 
sst1.jpg


Above is what I knocked up during my s/c install to allow me to torque the crank bolt back up to its 300+ ft.lbs

Same concept, but using a breaker bar versus a welded on 'handle'.

cheers,
george.
 
Back
Top Bottom