H55f identification

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 10, 2018
Threads
8
Messages
28
Location
Virginia
Does anyone know what the code on the side of the h55f in the attached picture means, if anything?

IMG_5794.webp
 
Not sure what that means but if this is 40 series related would see a picture of more than just that number cast in the housing that will work for 40/60/70 series. By the little bit I can see of the floor above the opening looks further back like a 60/70 series. Even if you could identify which one it was at the factory doesn't mean that what it is now. Been a few used 40 series H55F transmissions bought. Then cover pulled and installed a new transmission. Then used transmission sold with a 60/70 series top cover.
 
Yep... I've been that guy... Put a 40 series top cover on an hz h55. I think the 40 series specific h55 combos had the 34mm idler in the transfer while the 60/70 had the 38mm. They might have been some early 60/70 units with the 34, but you shouldn't find a 40 series unit with the 38mm
 
Yep... I've been that guy... Put a 40 series top cover on an hz h55. I think the 40 series specific h55 combos had the 34mm idler in the transfer while the 60/70 had the 38mm. They might have been some early 60/70 units with the 34, but you shouldn't find a 40 series unit with the 38mm

I know of more than yours and was not trying to single anyone out. Believe the 34 MM verses the 38 MM was by date not model. The 40 series was gone and 70 series started by the date they changed. Can find 34 MM transfer off a 60 series in the US.
 
Back
Top Bottom