Greasing Birfields

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 7, 2007
Threads
19
Messages
66
Location
Anchorage, AK
I finally got a pair of new birfs for my 80. I was going to pack them with grease without dis-assembly, making sure to get grease around all the balls etc.

Any problem with doing it this way, or do i need to take 'em apart to grease them?

Thanks, Dennis
 
Someone (can't recall who) rigged up a nifty way to use a grease gun and pressure-fill the joint without disassemby. I believe he used a rubber cork-like device found at Ace Hardware or Lowes or somewhere like that. It was a tight fit over the nozzle of the grease gun and fit into the cage where the axle shaft goes into the cage. He posted pics, including one in operation.

That should give you enough information to do a search for the thread.

-B-
 
Someone (can't recall who) rigged up a nifty way to use a grease gun and pressure-fill the joint without disassemby. I believe he used a rubber cork-like device found at Ace Hardware or Lowes or somewhere like that. It was a tight fit over the nozzle of the grease gun and fit into the cage where the axle shaft goes into the cage. He posted pics, including one in operation.

That should give you enough information to do a search for the thread.

-B-

I think it was 619TOY
 
Damn Adam, you've got an excellent memory! It was in fact 619TOY

attachment.php


attachment.php


attachment.php


He has a lot of good tips in this thread: https://forum.ih8mud.com/80-series-...e-dual-axle-rebuild-complete.html#post3085201

-B-
 
Last edited:
Back
Top Bottom