Got 02 sensors changed... now a new code

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2015
Threads
65
Messages
445
Location
Jefferson City TN
94 LC OBD1
The cruiser is now throwing a code 71. EGR System.

What is that and how do I fix it? Leaving Saturday for a cross country trip...

Thanks,
 
I believe I put in a new VSV when I did the head job. Got s pic of what those look like?

The modulator link is t working.
 
Just checked.

My VSV is OEM new from Beno this winter during head gasket job.
 
If carbon or particles from the dry rotted modulator has got into the vacuum system it can plug up the VSV and render it inoperative.
If changing the modulator doesn't fix the problem, then you need to blow out the vacuum hoses and vacuum pipes. You MAY be able to back blow the VSV while powering it up (just guessing). The VSV is a tiny diaphragm with an electromagnet on it to open and close vacuum.
Other issue is with carbon on the temp sensor in the EGR valve. A sticky or suck EGR valve could be it too.
 
It appears I have the green top(older) modulator. Without the green top on it. Honestly it may be time to replace it.
 
I should also mention all my vacuum lines are new.
 
The modulator is the plastic round thing left of the green top EGR, it has 3 hoses on top and 1 under it.

Right. In the write up you posted it talks about a blue one used on 60-62's and the early (green top) ones used in 80's may have been faulty because they eventually went back to the (blue top). One of the pics in that article looks like mine but with a green decal. I think I need to update to a (blue) one. Am I off in my thinking? 281k and it is probably original.
 
I think the left one is from FJ60. Other two are the old and new 80 ones.
Its been so long I dont remember if which color is new and which one is the old one.


lc-modulators_edited-jpg.468631
 
From that pic mine is the green top.

According to your article, which was good btw, I should have the middle one as a replacement
 
From that pic mine is the green top.

According to your article, which was good btw, I should have the middle one as a replacement

Thanks, you would think I would of remembered what color was the good one but its been years sense I have read anyone still running with the old/green one. I, and I am sure others, are on their second blue one. I once thought the green one was defective but I guess they just wear out with age.
 
So still get a code 71. New VSV, new modulator(blue top). New vac lines. Does anyone have a vacuum line diagram for this part of the motor? Maybe I got something crossed when doing my HG.
 
Back
Top Bottom