Full-Time 4wheel drive question...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 21, 2007
Threads
1
Messages
1
We have a 1994 Toyota Land Cruiser (FZ-J80) equipped with a 4.5L inline six cylinder engine. It has an automatic transmission and full time 4 wheel drive.

My question is, is there a way to convert this vehicle into a 2X4? Would it make a difference in fuel consumption?

currently our land cruiser get more or less 14 mpg...

removing the front drive shaft is too much... what i am interested in is more of a switch that can be placed inside the LC which switches the vehicle from 2x4 or 4x4...because 4x4 would still be useful sometimes... is there a switch out there that would make this possible?

Thanks... :cool:
 
A search would yeild a few threads on this. but the quick answer is NO, there is no switch that would get your result. There is reworking the T-case with a kit that cost some good hard money. then labor to install, then a couple of locking hub. Will the cost return the benifit on fuel savings. Will have to get a couple people to post up if it has. It would take a few years to return the cost. Negatives is loss of responsive handling with out the full time system. and the loss of ABS braking when the front is disconnected. Later Robbie
 
Last edited:
would free wheeling hubs help?
 
14mpg? congrats! you get 25% better gas mileage than me.

Do a search, there are a few conversion kits for sale from some great vendors on here.

welcome:flipoff2:
 
Free wheel hubs will not help alone(still turning all the drive train parts), you would have to a part time system in the t-case, Center diff lock switch, unless you drop the drive line as well. At best you will get aprox 2 miles to the US gallon better(on the 1FZ 80 series). Good luck, search through past threads, it comes up at least once a year for the past several years. Robbie
 
Back
Top Bottom