Fuel rail pressure test. Need banjo bolt and adapter

[Vin-barrett]

Asking for assistance on locating a suitable banjo bolt and adapter to perform fuel pressure test at the fuel injector rail. The FSM directs to use the Toyota SST gauge which of course I don't have.
Vehicle is a 1994
Appreciate the help

 

[Tredwards]

I used the kit on amazon from actron I believe. Had the banjo bolt in it and came with the gauge. I have a 1996.

 

[Tredwards]

Cp7838 I believe and whole kit about 40 dollars

 

[mod5csi]

Cp7838 I believe and whole kit about 40 dollars

I did the same. I Left the port in for future testing. And covered the valve with a vacuum fitting.

I was lazy and was testing the fuel pump so I installed it on the supply side of the filter. I will eventually move it to the filter discharge.

 

[Vin-barrett]

Thanks very much. Just ordered the actron kit as mentioned. I think I will do it at the filter. It's quite cluttered where the FSM directs the gauge to be installed.

 

[Tredwards]

I put it on the fuel filter outlet. Worked fine.

 

[mod5csi]

I put it on the fuel filter outlet. Worked fine.

I need to move mine, makes more sense to have it there.