fuel pump compatibility

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 9, 2003
Threads
70
Messages
165
Location
Breckenridge, CO
Is there any reason why I couldn't use a '71 fuel pump on a '85 block? If I could it would make a few things go a lot easier for me. Fuel lines would line up, no extra return lines, etc.

The actual pump arms look quite similiar, and it bolts right up. The old style pump does seem like it moves a bit more, not sure if the newer style one I'm comparing it to works right, its pump arm hardly moves...
 
I think you would have problems without a return line to the tank. The pump delivers a lot more fuel than the engine needs so you need a return line. The older sytle pumps did not have a return line. However, the carb that had a return line to the tank. I had a problem when my return line from the carb to the tank was plugged. I would buy the correct pump if I were you.
The arm on the older pump is shorter so you would not need the spacer if you still decide to use the older pump.
 
I have no provision for a return line to my tank(''66) and just plugged the return fitting on the carb(thanks, Jim C) I run a pump with no return and have no problems on a '74 F'n'a half.

Ed
 
mathblaster said:
Is there any reason why I couldn't use a '71 fuel pump on a '85 block?



No.


Be sure however, to remove the spacer/gasket affair that Toyota uses on the later pump, so that your fuel pump arm will ride on the cam and work properly.


I use a F engine fuel pump on my 82-2F in the Red truck.



:beer:
 
Back
Top Bottom