Front seat back wobble

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 24, 2012
Threads
46
Messages
329
Location
Minnetonka, MN
Anyone else have the front seat backs that wobble like crazy? They make a friggin racket. Any way to tighten up the seat backs so they're not always flapping in the wind?
 
Anyone else have the front seat backs that wobble like crazy? They make a friggin racket. Any way to tighten up the seat backs so they're not always flapping in the wind?

Just roll up the windows?

Sounds like you may have something else going on to me. Maybe a tire out of balance, too much air in your tires, tires too small, not enough weight, suspension set up to stiff?

I think I'll see if I can make mine shake to annoy the wifey so I can use that as a bargaining tool. "See honey, if I add that double swing out rear bumper, and roof rack you won't have to listen to squeaky seats"!
 
I don't have this issue with my 96, but maybe you could look at the tabs on the mounting side ( back ) and see if they can be bent in slightly to put more pressure on the back when it slides into place... just a thought.
 
If you're talking about the same thing as I think you are yes you can tighten that seat back. First unplug the connection under seat, then undo anchor bolts to seat and remove seat. You can do work without removing seat but it's a RPIA. Set on level surface and remoce declining hinge cover(10mm)i took two of the three nuts leaving one on to help speed up reassembly plus it isn't worth the time.now take of the reclining motor 8mm wrench. Once you've removed reclining motor use a unti seat screwdriver to manually turn reclining connecting rod by turning gear. nowe just turn gear until seat is in most upright position.reassemble is reverse order.
 
Back
Top Bottom