Front Locker Harness Routing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2007
Threads
116
Messages
1,002
Location
NB, Canada
I'm retrofitting locked diffs to my unlocked truck and the only thing I'm uncertain on is the exact routing of the upper part of the front harness. Could someone please post a picture of their OEM routing so I can see it. I have found pictures of the sway bar attachments and have those brackets on the way. See my picture of the location in question.
DSC_9030[1].webp
 
Is your harness used? If so, it'll lay in the route it should go up to that firewall plug.

That was how I routed mine, just let it pre-deformed route show once I got up off the axle.
 
Figured it out. There is a little black plug near the brake line connector. Remove that and install a clip/tie. The first white clip goes in a hole in the front side of the shock tower. Then inside of frame. Then two holes underside of frame running backwards that the next two white clips pop into. The black clips fasten in the sway bar brackets.
 
Back
Top Bottom