front-bumper-winch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 27, 2008
Threads
1
Messages
1
I have a 1991 HDJ81 Diesel with factory built in winch in the front-
bumper. I am missing the remote control cable.
The winch probably is a AISIN A1-1000 model, I have no idea if this is a 12 V or 24 V. I would like to wire into the winch a wireless receiver for remote control. Where would I find such a control and can anybody give me some advice ?
thanks
Michael
tamarak@nbnet.nb.ca
 
welcome to the site!

first thought: If you don't know whether it is a 12V or 24V (it takes 30 secs with a $5 voltmeter or some basic tracking of the wiring), a critical issue, is it possible that you're not likely ready yet for some more elaborate wiring if you're talking about a DIY job. Sorry, no offense intended.
Advice: maybe do some reading on basic wiring and electrical circuits first to get a feel for the difficulty of the job? Or get an OEM remote (likely not wireless)?
Disregard above if you're an accomplished electrician, of course... :)
 
the remotes are extreamly expensive, i've seen them go for above $1000 dollars

That amount of money would cover a new Warn replacement remote control, new female socket to replace the OEM and a Toyota FSM electrical diagram to match the Warn socket pin wires to the OEM control wires, plus it will be very cheap to replace in the future. :)
 
Last edited:
Back
Top Bottom