Front break pads arrangement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

On the OEM front break pads you can see big R and L letters. I suppose for left and right. But they seam to be identical except for the wear warning tiny tooth/spring. Does it really meter how you install them? Is the "left" and "right" regarding the car or a caliper? Do both pads with L go on the left caliper and the pads with R do on the right caliper? Or ones with L on the left sides of each of calipers and the ones with R on the right sides of the calipers? Anyway the pads look identical to me but I may be missing something.
 
I don't remember 100% and I just checked my electronic copy of the FSM ('96 FZJ80) and it doesn't specify (doesn't even talk about the pad wear indicators?) but IIRC the wear pad indicators go at the TOP - I checked the FSM for the read pads and it states:

"Install the 2 pads so the wear indicator plate is facing upward."

I assume the same would hold true for the front pads. Even the picture in the FSM doesn't show the orientation...
 
Put the pads so that the wear indicators are at the top and on the outside face of each rotor. HTH. :cheers:
 
i too was confused about this so i put "L" marked pads on left side of both calipers and "R" marked pads on the right side. thinking that they'd squeek when critically thin whether going forward or backward.:D
 
i too was confused about this so i put "L" marked pads on left side of both calipers and "R" marked pads on the right side. thinking that they'd squeek when critically thin whether going forward or backward.:D

Now that's funnay! :D I remember a post some time ago with someone concerned that their rig dropped out of reverse whenever they drove the rig in reverse for extended periods and at medium to fast speed. My advice ... why dontcha turn around and drive forward?!? :doh: Don't know if he did do that but if not, your arrangement of brake pads would be wonderful! He's never gonna hear those squeel tabs going forward! :D:hillbilly::D
 
Now that's funnay! :D I remember a post some time ago with someone concerned that their rig dropped out of reverse whenever they drove the rig in reverse for extended periods and at medium to fast speed. My advice ... why dontcha turn around and drive forward?!? :doh: Don't know if he did do that but if not, your arrangement of brake pads would be wonderful! He's never gonna hear those squeel tabs going forward! :D:hillbilly::D
hahahaha, that is the use of the squeel tabs in that configuration:lol:
 
Back
Top Bottom