Front Brake Light Housing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 29, 2007
Threads
20
Messages
130
Location
Cincinnati, OH
Alright...rookie question but...how the **** do I get off the front brake light housing to change the **** bulb?!

I remove the one screw under the hood and that loosens it up a lot but I'm apprehensive to just yank out the light housing.

little help? I need to get in front of the TV soon for college football!
 
You said "brake light" but I'm assuming you mean the front corner marker. One screw and then pull it straight forward. It's described in your owners manual. Yes, it takes a bit of force. There's a ball and socket fitting that has to pop loose. As long as you've removed the one screw and are pulling straight forward you won't break anything.
 
Last edited:
Owner's Manual?!

I'll be a dang fool! I went through the FSM last night and was getting pissed! Didn't even think to look in the owner's manual!

And you're right...it's the front corner marker.

Thanks MoJ.
 
Actually, I drive at high speeds in reverse quite a bit ever since my forward gears crapped out on me. As a result, I've installed brake lights in the front bumper as a precaution (I like to keep it very safe at all times).




:grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp:
 
Actually, I drive at high speeds in reverse quite a bit ever since my forward gears crapped out on me. As a result, I've installed brake lights in the front bumper as a precaution (I like to keep it very safe at all times).




:grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp::grinpimp:

I was thinking about that the other day (too much time on I-55) Have you made any progress on finding the culprit?
 
Back
Top Bottom