Front Axle Service Time!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2007
Threads
10
Messages
34
Location
Denver Colorado
Well its high time I get that front axle service out of the way before snow starts to fall. I have never done the job before, but feel fairly confident with my wrenching abilities. How would you guys compare it in terms of difficulty compared to rebuilding a motorcycle top-end? 2 or 4 stroke? Anyways, seeing as how I haven't done the service before, I was hoping someone in the Denver area who has, would be up for coming over and sort of looking over my shoulder so I don't botch up anything too bad. Of course beer and pizza would be provided! If anybody had a garage to work in that would be even better, as all I have is a quiet street in Denver county.

Side note: When I first got the truck, it needed brakes badly! I took it to just brakes or brakes plus or something and they charged me 800 bucks for new rotors, pads, calipers and the like... from what I gather here, it probabl would have only been like a few hundred more to get this job done?? Am I right about that? that would be two horrible experiences at chain auto-repair/ oil change shops!!! AARRGH
I don't know if it'd be nessecary to replace any parts in the brake system yet, but I may as well do the pads while I'm there...

sorry to ramble on...

Any takers on the pizza and beer??
 
new rotors were included in when i purchased my LX last year and that job was $800 at a local shop so it sounds like your brake job was pretty reasonable.

Parts from CruiserDan at American Toyota were a couple hundred and tearing into the brakes to replace all that you mentioned gets you about 1/3 of the way there to do the knuckles. I just did mine a few weeks ago and was very glad to have a fellow cruiser enthusiast that had done it before looking over my shoulder.

The FAQ is imperative to have. I've never done anything this involved but it wasn't too bad.
 
well, thats kind of a relief then, I was hoping it wasn't just like a little bit further to do the axles. What did you think of the techiness of the job? what would you compare it to? how long did the job take you? Ive read its a 2 :banana: job? what is a similar job that would be considered a 2 bananna job? I just don't want to get myself in some position where I can't get the truck back together properly. I don't have a garage anymore, so no vice, air compressor, etc...
 
I don't know if it'd be nessecary to replace any parts in the brake system yet, but I may as well do the pads while I'm there...

The pads are super simple to replace without taking anything apart, it is the rotors that require taking the hub apart to get to. How long ago were the pads replaced (miles wise)? Seems the average mileage OEM pads last is ~30K miles so if it is considerably less than that I wouldn't worry about them.

There are some folks in the CO Springs area - You might want to check in at the Rising Sun 4x4 Club forum and definitely the Colorado Land Cruisers Club, as they are your local club down there.

As for the difficulty rating of the job? Most estimates I've seen say plan for 2 full days your first time. I had a Toyota Master Tech rebuild the front axle on my 80 back in April and he had it done in less than 6 hours, including a lunch break, putting on a new fan clutch, and tightening the belts :D. I used that as my learning experience and plan to tackle my LX's rebuild myself.
 
Cool, I'm actually in Denver now, need to change my profile. I'm debating just calling slee offroad or some similar type of shop and getting a quote, Although I doubt I'd like hearing a $1000 dollar plus repair bill is on the horizon. 2 days seems like an awful long time just to do a front axle! I tried to download the FSM, but couldnt seem to get it to work, any suggestions on another source? Would the step by step instructions in the FAQ be enough to tackle the axle?

PS: what'd the guy who did it in 6 hours charge you?
 
You should be able to get it done over a weekend with the right tools and the FAQ from this site. I think that we only referenced the FSM for the torque specs and the exploded diagram. Torque specs are in the FAQ too.

We went at it from about 10 am to 10 pm with three guys, me tearing one side apart, another tearing the other side apart and jjcobm (MUD Member) came up to look over our shoulder and let us know what we were doing right/wrong - he got his hands dirty too. If you don't have someone there who's done it before I'd recommend taking it one side at a time.

As for the FSM, I downloaded it from Toyota via:
https://forum.ih8mud.com/showthread.php?t=128021&highlight=fully+FSM

Looks like that may no longer be working. I wouldn't sweat it too much since you've got the FAQ on the job right here on MUD.

Good Luck.
 
Cool, I'm actually in Denver now, need to change my profile. I'm debating just calling slee offroad or some similar type of shop and getting a quote, Although I doubt I'd like hearing a $1000 dollar plus repair bill is on the horizon. 2 days seems like an awful long time just to do a front axle! I tried to download the FSM, but couldnt seem to get it to work, any suggestions on another source? Would the step by step instructions in the FAQ be enough to tackle the axle?

PS: what'd the guy who did it in 6 hours charge you?

Come on over to the Rising Sun 4x4 Club forum then since your up in Denver now :)

I paid way less than the $$ amount you state above for all the work plus the knowledge gained just getting to watch him work was invaluable! Unfortunately I don't think he is doing much side work anymore now. Considering typical quotes from a dealership run $1200+ for the front axle service and don't include swapping the Birfs (which he did for me) nor the ability to help and learn, I feel it was $$ well spent.

There is another member in town though that is doing side work and is a Toyota mechanic if you are interested. He is actively looking for side work so you might want to shoot him a PM. He goes by Squishy! on Rising Sun.

:cheers:
 
Got three estimates from three dealers for front axle service labor today; $560, $850, and $1100, not counting parts of course. The $560 estimate was given by a junior service writer who had to put me on hold to ask around. If I can hold that one to it, and it doesn't change, that would be a good deal. I think, however, that he gave me the estimate to do one side; not sure if he realized that or not. On the other hand, for a mechanic who does a lot of these, 6 hours might be enough time to do it; but they would not make their usual 200-300% profit on the labor.

g
 
Back
Top Bottom