Delta VS
Supporting Vendor
Do you have a cubby insert (95-97 dash) from Delta (or even witsended)? Do you try to mount something with an arm hanging to the left? Does that thing keep un-tightening itself? The solution until now has been the Hex Adapter, a machined aluminum part that securely mounts three RAM balls in place and is an add-on to the cubby. That will continue to be a solution, but the Delta cubby will now include a small 3d-printed part that will lock ONE RAM ball in place directly to the cubby, in any of the 3 threaded inserts.
The first 19 people who EMAIL their order receipt (from Delta or witsended, will fit both) and a current shipping address (in the lower 48) will get one of these to try out for free. You will need to supply your own 1/4-20, 1/2 to 5/8 long bolt.
The red arrow points to the printed part:
PS this is not a thread to discuss anything but this part. Anybody who tries to bring up any past BS will be reported to Woody.
The first 19 people who EMAIL their order receipt (from Delta or witsended, will fit both) and a current shipping address (in the lower 48) will get one of these to try out for free. You will need to supply your own 1/4-20, 1/2 to 5/8 long bolt.
The red arrow points to the printed part:
PS this is not a thread to discuss anything but this part. Anybody who tries to bring up any past BS will be reported to Woody.
