found the culprit...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Mace

rock scientist..
Staff member
s-Moderator
Moderator
Joined
Feb 17, 2002
Threads
439
Messages
21,708
Location
Las Vegas
Pulled the Dizzy out today, the shaft is uber stiff. I put it in a vice and used a torque wrench on it and got it up to 27 lbs....

Sooooo....


Do I install the HEI dist that I have sitting around, or do I rebuild the small cap fully electronic dist that I have been using for 19 years?????


Right now I am thinking that the HEI will go in and later I will rebuild the stock dist...


Ideas? suggestions?



woodycaption24jf.jpg
 
Mace said:
Pulled the Dizzy out today, the shaft is uber stiff. I put it in a vice and used a torque wrench on it and got it up to 27 lbs....

Sooooo....


Do I install the HEI dist that I have sitting around, or do I rebuild the small cap fully electronic dist that I have been using for 19 years?????


Right now I am thinking that the HEI will go in and later I will rebuild the stock dist...


Ideas? suggestions?



woodycaption24jf.jpg

Yeah that last thing:cheers: I had the old style points in mine for 9 years the suckers arced themselves together, HEI dropped right inand all is well. Tha HEI sounds to be the quickest rout, But rebuilding the other might be a good backup.
Good luck

Oh and who's the guy with the curse?
 
Jason-


Have you tore down the distrib yet? Do you know what is going on with it?


Call me at the shop....Just having a beer watching the F1 AU GP.....


I think I have one of those distribs 4U.


-Steve
 
Back
Top Bottom