For Sale Section (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Truck:
2010 Toyota Tacoma Double Cab, 5' bed. Magnetic Gray Metallic, TRD Off Road Package with factory rear e-locker. Has OE XM satellite radio and antenna. OE TRD dark gray floor mats, auto dimming mirror, TRD seats and fabric. Has the inverter, downhill assist, airbag off, a-trac, all the bells and whistles.

Mileage:
36,800 miles, but still being driven occasionally.

Price:
$27,000 O.B.O. - No trades, please.

How to get in touch:
Shoot me a PM. I will check mud at least a couple times every day. I do work full time, so depending on schedule, it may be the following day before I can get back.

Has the following modifications:
  • OME 885 Springs - Front
  • OME Dakar leaf packs - Rear
  • OME Nitro shocks all the way around (Full OME suspension kit is around $1,100)
  • 3* rear axle shims
  • Light Racing UCA's ($450)
  • Stubbs Welding HD-SKO rock sliders ($355)
  • Bud Built Skids - full flat belly (IFS, Mid, T-Case, BudBuilt Crossmember) ($725)
  • OE Toyota TRD Special Edition FJ Cruiser Wheels - Anthracite (16", 4.5" BS to fit 33's without wheel spacers) ($1,000-$1,200 if you can find them)
  • 285/75/16 BFG AT (approx 18k miles on them. they still look new) ($900)
  • Front windows tinted to match rear - 20% Llumar
  • Exhaust re-route from under t-case to beside for skid plate clearance (I paid around $75 for an exhaust shop in town to do it.)
  • NMO antenna mount on roof, with coax run to the bin behind the driver side back seat. This was professionally installed by the local shop that does all of the public safety radio installations for Birmingham and Jefferson County. The NMO style mount is the standard for law enforcement, and there are tons of antenna options. There's about 4' of slack on the coax, so if you wanted to put in a Cobra 75WXST, you could route it to under the driver's seat, and then get an NMO CB antenna such as this: http://www.cheapham.com/products/Larsen-NMO27B-27%2d30-MHz-Antenna%2d-Black.html I used it for my 2m/70cm ham radio, and had the body of the radio mounted behind the seat.
Total mods, approx $4,600

Since day 1 it's had M1 full synthetic every 5k miles religiously, and the oversized M1-209 filter. Dealer did the 10k service. The OME suspension, LR UCA's, wheels, and tires were installed around 18,000 miles.

I will also include all OE suspension components (Leaf Packs are the TSB replacements, not the flimsy ones) that were removed when the lift was installed, as well as the OE wheels and tires. The tires are on the rims, but the beads aren't seated and they need valve stems. I had the TPMS sensors transferred to the FJ wheels. I've also got the OE skid plates and mud flaps.

The bad:
Has a dent in the rear bumper on the driver's side. I was rear ended when someone at a stop sign thought I was pulling out, and they pulled up and ran into me. The tailgate and DS tail light were replaced, but I opted not to replace the bumper, as I was planning to do a steel off-road type bumper.

The CD changer seems to have a disc stuck in it.

KBB price for "Excellent Condition" is $28,794 Aside from the bumper and CD changer, I'd definitely say that the rest of the truck qualifies for Excellent condition. A body shop quoted me in the neighborhood of $700 for a new bumper installed. Given all the mods, as well as including all of the OE parts, I think the price of $27k is a bargain to be honest.

Edit: Pics posted.

7990304049_125ea3eb3a_b.jpg


7990313884_561bf87836_b.jpg


7990303741_0ff7947ab0_b.jpg


7990314122_1a2cb6f9bb_b.jpg


7990305049_6d6501d56a_b.jpg


7990305503_9c91a7f821_b.jpg


7990305731_4809b347c5_b.jpg


Exhaust re-route (pre-skidplate pictures):
5611015031_468b20bf7c_z.jpg


5611012579_c6032875ee_z.jpg
 
Last edited:
I've got a 2001 Yamaha yz426f. $1500. Runs REALLY strong. It scares me. It'll pull the front wheel up in 4th gear if you've got good traction. Might trade some stuff...
 
FS: Drivers seat cushion.
 
For the 80..
You want it?
I'm outta whisky..
 
ClankBang said:
For the 80..
You want it?
I'm outta whisky..

I'll take it! Bottle for cushion
 
Make it two... And we got a deal.
 
ClankBang said:
Make it two... And we got a deal.

1 bottle and 1 shirt and we have a deal
 
Can't do it..
Just looked at the new price..
Can't belive I paid 130+ dollars for that.
 
ClankBang said:
Can't do it..
Just looked at the new price..
Can't belive I paid 130+ dollars for that.

It's all good!
 
Very nice rig
 
You just wanted to post another pic of your Cruiser Didn't you.
 
bhmmapping said:
thule load bars and gutter mounts - $100 ?? - interesting trades and offers welcome:

don't know what number or what width - they look like this on my 80:

I always used Thule racks on my cars. Preferred the square bars over the Yakima round bars.
 
Found some stuff I don't need anymore while cleaning the garage last night - trades(beer works too) or small sum of cash for both or either. :

60 series vents -
IMAG0954.jpg


Mile Marker Hubs - I installed these on my old 80, they worked but required a bolt and washer in the end of the birf instead of the snap ring. I bought them to see how the rig felt part time before spending big money on the aisins.
IMAG0943.jpg


Hubs in action at Tellico:

DSC00309.JPG
 
Last edited:

Users who are viewing this thread

Back
Top Bottom