Flexing the LX for the first Time

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Nice pics...J's f/r? I just picked up an LX, looking to lift it up...
 
Yeah, you might rub a little with the J's in the rear, only FULLY stuffed though, not the front though. You may need to add some sort of a spacer on the front to even out your rake, especially with the ARB bumper on the front.
 
Nice!

I wish mine flexed like that (of course, I need a lift first).

01-17-07_1103.webp


:cheers:
01-17-07_1103.webp
01-17-07_1104.webp
 
Last edited:
Nice pics...J's f/r? I just picked up an LX, looking to lift it up...
Yeah J's front and rear....Slee sway bar extensions, F&R....Slee Ext. BL F&R...Slee Bumpstop spacers, F&R. No caster correction yet.

Where did you rub? The frame or the flare/mud flap area?
Not sure I was unable to open my door when I was rubbing on the rear driversside...and my passenger rear tire was a couple feet off the ground so I didn't ask my wif to get out and look. BUt it sound like it was hitting plastic...so maybe flare/mudflap/ or inner fender well?? Bump stops in the back don't fix this?
Yeah, you might rub a little with the J's in the rear, only FULLY stuffed though, not the front though. You may need to add some sort of a spacer on the front to even out your rake, especially with the ARB bumper on the front.
Yeah I was fully stuffed yesterday a couple of times when it rubbed.
THe rake is pretty bad. But as of now without castor correction and no spacer I have no noise or vibes...I'm hesitant to mess with it to be honest. Maybe the sliders, IPOR skid plate, and a rear bumper will even it out?...BUt then I put a M12 on the front and I'm back where I started..I don't know?
 
Bump stops in the back don't fix this?

How much did you extend the rear bump stops and did you do adjustable panhards? If you have the stock panhards, the body is shifted to the right and you will make contact with the DS flare. The frame contact can be resolved with extended bump stops.

-B-
 
Some more pics from yesterday.

First pic, Just before the rear wheel goes up in the air and the wife freaks out.:cool:
2nd post: One of several times I'm thinking, "I need a snorkel some day." (Did it anyways)
3rd. Post: One of the times I'm thinking, "sliders would be nice some day".
 
Last edited:
How much did you extend the rear bump stops and did you do adjustable panhards? If you have the stock panhards, the body is shifted to the right and you will make contact with the DS flare. The frame contact can be resolved with extended bump stops.

-B-

When you say "shifted to the right" do you mean DS or PS?
Extended them with Slee's rear Bumpstop spacer deal.
 
Last edited:
The right side of your vehicle is the US Passenger side (PS.)

-B-
 
The first thing you need to do is to determine what is rubbing and where it is rubbing. Then post back and get some recommendations.

-B-
 
Back
Top Bottom