Flawless performance LX450

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 25, 2008
Threads
8
Messages
66
Location
Charleston, SC
Drove to Jacksonville, FL from Charleston, SC (about 250 miles one-way). First of all, the truck ran beautifully. Just performed an oil change and exchanged some fluids for new fluids. I just hit 130,500 miles. Got about 345 miles out of a fill up.

After about an hour so, the truck would vibrate right around 70mph. If I go faster or slower, the vibrations go away. Either the vibrations go away or they are at a much higher frequency that I can’t feel them. Not sure what is causing the vibrations. A/C was not on. The cruiser was awesome at 85mph on cruise control.

Anyway, I was on a work trip to Jacksonville. Didn’t get any work done. I spent most of my time showing the cruiser to my friends. Spent most of the time under the truck. I was convinced that I needed a lift. I want to perform a 4” lift with 35 MTs. Do I have to extend brake lines? Not sure about re-gearing. Most of my friends have Jeeps and one has a Bronco (OJ Simpson style). All have lifts and MT tires.

The way back was fun. It was raining the whole time and the cruiser never missed a beat. I’ve never enjoyed driving in water puddles until now!
 
After about an hour so, the truck would vibrate right around 70mph. If I go faster or slower, the vibrations go away.

Sounds like a tyre balance problem to me.

As for the question on what you need for a lift, those topics have been covered quite a few times recently. Proceed with your questions if you want but you won't get quality replies because most are weary of the discussion. Your best option for getting this information is by searching the FAQ and for the recent discussions on lifts and those components needed for the lift.

-B-
 
x2 on the tire balancing.

And you don't need a 4" lift for 35's. 2.5" lift if you adjust the bump stops will work just fine. (My 2.5" OME + 1" body lift meant no fiddling with that and nearly zero rubbing.)
 
Back
Top Bottom