Anyone know what this hoses for ? I'm running a 32/36 Weber now ! Does it need vacuum are just block it off?
Fj60
- Thread starter kadencorey
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Anyone know what this hoses for ? I'm running a 32/36 Weber now ! Does it need vacuum are just block it off?
Believe that goes to the EGR which seems to be disconnected if you are running a weber. Should be blocked off I believe.
- Thread starter
- #3
thanks going with the weber has made things alot easier for me but i still got alot to learn
That is the original carburetor float bowl vent hose that fits on the USA carb. The other end connect(ed) to the charcoal canister on the passenger's side through an ignition controlled solenoid valve.
If you don't have that carb any longer, you don't need that hose. No need to plug anything up either.
If you don't have that carb any longer, you don't need that hose. No need to plug anything up either.
- Thread starter
- #5
Thanks so much Iam still learning and even better I don't have to block it off ! There's two vacuum ports on the distributor do both of those also get vacuum or just one?
- Thread starter
- #6
With the weber I believe that only one gets the vacuum. One is a vacuum advance (what you have hooked up) and the other I believe goes to the HAC which is removed when you go to the weber.
- Thread starter
- #8
Thanks so much for ur help I thought it was right but just didn't know for sure ! It does run pretty good I have the timing set a 7 degrees guess I'll know more once I put the truck on the road and actually start driving it! It's big an adventure putting this fj60 together.