FJ40 Turn Signal Angle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2007
Threads
116
Messages
1,002
Location
NB, Canada
Are the turn signals on the FJ40 angled slight top forward or should they be perfectly aligned with the bib. I just bought some OEM ones and they both seem to be slightly top forward from vertical if I sight the lens/gray joint against the front of the bib.
Am I being too picky?
 
Are the turn signals on the FJ40 angled slight top forward or should they be perfectly aligned with the bib. I just bought some OEM ones and they both seem to be slightly top forward from vertical if I sight the lens/gray joint against the front of the bib.
Am I being too picky?
Signal angle depends on how many things you have run into.
My 1970 front parking/turn light has always had a very slight forward lead.
The first time I ever really paid any attention was when I bent the crap out of the left fender years ago and used the right one as reference and it leaned slightly forward.
The rig was three years old when I bought it and I am pretty sure it had never been wrecked and all the stuff that has happened to it in my time has been on the left side so the right fender is probably the most stock part on my FJ40.
 
These pictures provide a better description. You can see the angle isn't much but it isn't exactly straight up and down. I'm just curious because I'll adjust it if it isn't right but if it is ok then I'd prefer to leave it.

For a bit of background this 40 is going on 8 years in rebuild and i don't think any two panels are from the same truck.

DSC_3226.webp


DSC_3227.webp
 
I’m pretty sure that the correct position would be that the front lens off the housing should be square with the front grill panel.
 
No wonder it has taken 8 years... You're worried about an angle like that lol. Just kidding. I agree, seems like it should be vertical. But no one will notice but you. Cruiser looks really good!
 
Back
Top Bottom