Fj40 rear spring hangars

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2017
Threads
39
Messages
114
Location
Great Barrington, MA
I just acquired a project fj with frame rot at the front rear spring hangers... my question is: I was going to useruff stuff outrigger and spring hangar but I’m. A bit confused at their description. “This is a Spring Hanger made for 2.75" or 2.5" Leaf Springs with the large bushings (GM style) Leaf Springs” I’m looking to use a 2.5” OME spring lift. Sorry if this is a stupid question- this is my first fj40.... thanks
 
I use them all the time. The Ruff Stuff spring hangers use a large poly bushing and steel sleeve but will work fine for your application. The OME springs use a 60 bushing in the spring eye, so you're going to have a mix of 40 and 60 bushings anyway.
 
FWIW, the larger bushings hold up better than the stock 40 bushings.
 
great! That’s what I needed! Do you use the same hangers in the rear/rear? You stated that I’ll need to use a combo of 40/60 bushings; does that mean I need to find a shackle specific to f60 if I use ruffstuffs hangars in both locations? Thanks again!
 
While you can use the 40 shackles, I prefer the much stronger FJ60 shackles. Or, I build them from 3/8" flat bar and use 18mm bolts.
 
great! That’s what I needed! Do you use the same hangers in the rear/rear? You stated that I’ll need to use a combo of 40/60 bushings; does that mean I need to find a shackle specific to f60? Thanks again!
While you can use the 40 shackles, I prefer the much stronger FJ60 shackles. Or, I build them from 3/8" flat bar and use 18mm bolts.
ok sweet! Thanks for the help!!
 
FJ60 springs/bushings are wider than FJ40, so if you use FJ60 shackles on 40 springs you may need to use a spacer (washer), or turn down the shoulder on the pin. A washer is easier ;)
 
Man-a-fre once had bushings for the 60 series in two shoulder widths. One with wide (1/4")shoulders that accommodated the narrower aftermarket spring and a second stock shoulder width, roughly 3/16 . I haven't checked with them in a year or so but they may still have them
both.
Thanks for the info!
 
Back
Top Bottom