FJ40 locking left rear brake

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 7, 2004
Threads
42
Messages
1,515
Location
EVERGREEN, CO, USA
FJ40, 1979; mostly stock.
My left rear drum brake is locking up. Almost no maintenance has been done to my yellow beast since I bought it in 1980. Any ideas from the guru's in fj land?
David in Denver
 
This is one of those "not very HELPFUL " postings, but I can't help but say... very little maintenance since 1980?!!!!!!!!
Wow, am I glad I have one of these!
 
As much as it pains me, I have to agree with Wayne :flipoff2:

When the brake shoes get soaked with brake fluid, a funny thing happens. They don't work very well while the surface is wet, but once they get warmed up, they like to stick instead of applying nice even pressure to the drums since they don't really dry out like they would with a water submersion - the shoe just becomes sticky.

Pull that drum and see what's going on. It's also possible that the axle seal is leaking and allowing gear oil into the drum, but gear oil doesn't seem to cause the 'lock up' feature as commonly as brake fluid leakage.

Good luck,
Eric
 
Thanks Eric; Accually, I've done a lot of maintenance on brakes for the FJ40, just not this one. My new 1973 FJ40, in 1974, developed the soaked brake shoe problem and old mechanic told me that I had an axel shaft that was scored from the factory. He was right. Toyota maintenance, under warrenty, had no idea.

At real slow speed, with slow brake pedal pressure, u can feel the brakes just lock up. Front disks look great. Haven't torn the rear apart yet. No visable sign of leaks at this time. OK, its got a lot of miles, around 67,000. Time to break out the tools.

David in Denver
http://homepage.mac.com/dfmorse/RigProj/index.html
dfmorse@qwest.net
 
When you pull the drums, make sure they're round. It's amazing how egg-shaped they get.
 
David - your choice but I too have a 79FJ40 98+% stock and instead of doing the rebuild of the rear drums I converted to rear disc brakes -- glad I did, very happy with the results. If your wheel cylinders are 'gone' (pitted, etc.) you'll probably spend about as much going back with drum setup as doing the conversion. You can also save yourself a great deal of money by piecing your own 'disc kit' together rather than buying a pre-packaged kit. Do a search there is plenty of info here on the subject of disc conversions.
Tom
 
Back
Top Bottom