Factory Grey

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 29, 2009
Threads
31
Messages
179
Location
Smyrna, GA
Has anyone found a cheap option for matching the dark grey factory trim on an 80?? I found a replacement bumper but it is the lighter grey color from an lx450 and needs to be painted to match.
 
Go to your neighborhood auto body and paint shop and have them mix up an aerosol can of the factory color for all of $20.
 
The rattle-can will work okay so long as you have decent spraying technique down, but if you're planning on hitting the end caps as well, you may find that the paint will chip off after a while. Since those are plastic, they flex and expand/contract with the weather.

DuPont makes a flex agent (2350S) that gets added to paint so that it stays flexible when going on plastic. If you can afford another rattle-can, might ask the paint shop if they can make you a can with the flex agent in it. It's spendy if you have to buy a whole bottle of it...

I did my bumper a five years ago (with a regular sprayer though), including caps, and they still look as good as new.

One last thing... when I went to the paint shop for the paint, the book had quite a few very similar shades of gray paint that were listed for '97 Toyota. The one I got was a DuPont ChromaBase code UCAA3. It was a perfect match for my bumper.
 
Back
Top Bottom