factory gm and ford cast iron t-case adapters and a couple of AA cruiser adapters

[orangefj45]

Location

United States

got a few cast iron units up for grabs:

1) th350-203 $25
2) sm465-205 no coupling sleeve $75
3) sm465-203 $90
4) th350-205 with shifter and hardware but no coupling sleeve $75
5) th700-241 or 208 $35
6) C6-208 or 241 $35

also 2 Advance Adapters units

1) th400-land cruiser 10 spline t-case used for about 500 miles comes with adapter, spud shaft, th400 output shaft and cast alum. governor cover for shift linkage $275

2) sm465-land cruiser 16 spline t-case bolted up but never run $275

you want em, you pay the frieght or pick em up. i may be able to deliver these in the greater bay area.
can post pics if needed.

 

[heavytlc]

got the coupler for the 465-203, if so I will tell some guys I know looking for the setup. I have one I am not using, but it took a forever to find, so I am keeping mine.

 

[orangefj45]

i have a coupling sleeve but i'm not sure what it's ofr. can you post a pic of yours?

i thought the 465-203 setup used a female input gear on the 203 and no coupling sleeve?!

 

[HI^C]

465 203 uses a female gear and no coupling sleeve
I could use one of those input gears!

also could use a th350 to 205 sleeve.

 

[orangefj45]

th400 to cruiser adapter is sold

 

[heavytlc]

Yeah well, it is not the first mistake I have made. I have not looked at my 203-465 stuff in awhile, I am now building my doubler to go to a th400, short 32spline output, with a 208 style adaptor, and redrilled face. Whatever, the price on the 465-203 is cheap.

bump for ya!

 

[yosemitesamtlc73]

sm465-land cruiser 16 spline t-case bolted up but never run $275
will this work with a stock 73 3 speed tcase? if so very interested

 

[orangefj45]

pull off the stamped steel 6 bolt cover on the back of your case and see if it's a 10 or 16 spline? does the cruiser have a 3spd or 4spd? this adapter is for the 4 spd acse.