- Location
- United States
I have most of the needed parts for an F135 rebuild: block that needs boring, complete head in need of a valve job, extra set of F135 valves and springs (so that's 2 complete sets of valves and springs), valve covers, etc, oil pan, side cover, and original pistons. The only parts needed for a complete rebuild would be 2 rocker arm stands and a cam (I have one, see below). $700 for all these parts plus shipping from 38305.
Alternatively, if someone needed an F135 rebuilt, I'd rebuild this one - I've already built several F and 2F engines and have a local machine shop that is very good with Toyota machining. I've got several new parts: cam that has been ground by Delta Camshafts (RV grind), a new set of OEM pistons that are 0.020" over, and most of the engine bearings.
Cheers,
Mike
Alternatively, if someone needed an F135 rebuilt, I'd rebuild this one - I've already built several F and 2F engines and have a local machine shop that is very good with Toyota machining. I've got several new parts: cam that has been ground by Delta Camshafts (RV grind), a new set of OEM pistons that are 0.020" over, and most of the engine bearings.
Cheers,
Mike
Last edited: