f series engine VSV Box

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 25, 2006
Threads
1
Messages
2
I am new to this sight ....thought id start with an issue thats been dogging me for the last week... i have a 74 fj40 f engine and i have been slowly piecing it together ... not going for stock ..... just a mut.... anyway ..I think its a timing issue involving the vsv box ..The vacume at this point is connected direct to the distributor vac line from the intake.... it just wont stop sputtering under acceleration.... anyone know if it is absolutly necessary to connect the vac line for the distrib through the vsv box which is then wired to a computer (in the manual schematic) and the heat sensor and speed sensor .... and is the speed sensor considered the speedomoter? I idealy would like to avoiding having to find the rest of the components (computer speedsensor etc) i hope i am explaining this somewhat clear.... any help would be appreciated ..thanks :beer:
 
The VSV won't work wthout the computer and other inputs. Remove & discard the VSV.

The stock 74 dissy is vac retard. That's a Bad Thing (tm).

Don't connect a vac hose to the dissy. Set the base timing at 10 deg and run it as centrifugal advance only. It has 30* available.
 
thanks for you advice.... i figured it would be all or nothing... thanks again
 
Back
Top Bottom