ezi awn with load bars

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2007
Threads
120
Messages
446
Location
CANADA
hey guys just looking to get some opinion...maybe some have done it, i bought an ezi awn roof top tent and was wondering if its a big deal to mount to loadbars as i really dont want a full rack as i'll only be using it like once a month anyway. so just see'n if anyones done the same in using loadbars instead of a full roof rack, pics of ur rig would be cool to

matt
 
I use 3 Yakima crossbars with their raingutter towers. I use the Yakima snap-around plastic clamps with the hardware supplied by Eezi-Awn.

I would never think of using the factory rack for anything heavy or bulky and large like a RTT.
 
so u think 2 is not enough?

I use 3 Yakima crossbars with their raingutter towers. I use the Yakima snap-around plastic clamps with the hardware supplied by Eezi-Awn.

I would never think of using the factory rack for anything heavy or bulky and large like a RTT.
 
so u think 2 is not enough?

2 is fine i only run 2 and sleep two people plus the dog (400lbs) comfortably with no issues. although i am running 1x3 square pipe.
IMGP1496.webp
 
Not for my 1600 when bouncing around off road. What is your size/model?
 
i bought the 1400, so what u guys think?
 
Ask Paul May of Equipt Vehicle Outfitters. I bought my RTT from him, and he has the advice you need. He recommended 3 bars for my setup.

EQUIPT Expedition Outfitters - Home
 
Sure it can be done! Obviously, not with the port installed rack but with aftermarket racks/load bars. I'm using african out back load bars from slee. For the 1400, 2 load bars are fine. For the 1600 and larger 3 load bars are necessary. The AOB are adjustable and are made of aluminium.

I've had the 1600 for a couple years but always on three load bars
IMG_0050.jpg


IMG_9837a.jpg


_MG_6569.jpg
 
Back
Top Bottom