external/internal resistor

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 17, 2005
Threads
93
Messages
343
Location
wenatchee
ok I'm having some trouble here. I got a new coil and it has a internal resistor and and I still have my stock external resistor. and I have no idea what to do with the wires. the guy at the parts store tried to tell me what to do and I got really lost and so now i'm here. i've had the cruiser for about 3 months and I still havent goten it to start. I got new plugs, new plug wires, new points, and a new coil, new starter, new cap, new rotor. by the way its 1970 if the helps you help me.
thanks
 
65swb45 said:
When it comes to things electrical, I tend to err on the side of being overly conservative. Rewiring a truck is something I hope to NEVER do again!

That said, I would not trust the guy from the auto parts store, who isn't the one that's gonna fix your junk if it blows. I would leave the external resistor in place initially and measure the voltage across the resistor and check the color on the spark plugs, and take it from there.

I just gonna do this ........well just because

All of what Mark says is indeed true...but I'll add the following. If the new coil is indeed internally resisted as parts guy claims and you wire in your external ballast as original configuration....she will not start...unless of course you are running the 12 volt start only by pass...in which case she'll start but better than a 50/50 chance she'll die immediately. On the other hand, worst case, if parts guy's claim is false...no internal resistor, and you don't wire your old ballast in line, then she'll start right up, and you will in a fairly limited time melt down the points and possibly take out your condensor. Not big bucks nor the end of the world. But then again the original poster probably knows this already too.
 
thanks but I'm still lost as all can be. could someone give me a link to a good wire digram? I think that there are some wires missing also, and I've never had the lc started since i've had it.
 
Back
Top Bottom