Extending breathers for transfer case

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 26, 2017
Threads
32
Messages
296
Location
Bay Area, CA
Hi all,

I’m having trouble understanding how to extend the breathers from the transfer case. I’ve read George’s article and lcool.org on how to do it but is not making too much sense.

Could someone please explain how to do this? Pictures would help too.
 
I did the Transfer case and the two differentials. I bought the ARB kit and it is O.K. The trick is to get the breather vents machined down to about 1/4" to get the tubing to fit properly. Important to leave a little slack on the differentials to allow for the movement of the body and the diffs to extend in rough terrain.
 
Back
Top Bottom