Exhaust System

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2007
Threads
18
Messages
36
Location
STerling VA
Today after much searching i finally found the culprit, seems like the pipes running from the engine (downpipe) is blowing very close to the cat converter and having inspected the rest of the Exhuast system i noticed the rear end drum (Big ugly thing close to the RR Tire) has broken a hanger and is blowing. I couldng understand why the truck sounded weird. Well seems like i need a whole new exhaust system. I have had this truck for 3 yrs (94) and dont know if the Cats have ever been replaced. Would i need to replace the CATS while doing the whole exhaust from the down pipes all the way to the end.
I have seen some Borla stuff any input if its a good Cat Back. I only see Borlas for 95's would anyone know if this would fit a 94. Or should i just go for the OEM exhuast system.
Who can i contact for OEM downpipes. i really dont want any thing but OEM downpipes. also who can i get the sensors from i would prefer bosch or OEM.
Any / all help would be great. i am projecting a $1000 hit on this but it will extend the life of this cruiser since i only have 147k on it now.

Thanks for everyone help
 
I know it's no help with you over there in the USA, but here in the UK a complete exhaust system from Toyota is £2800 and at the mo it's $2 to the £1

I managed to find a new (non OEM) down pipe for £180 inc 1st cat, which did not fit very well, it had to be heated up and bent into the correct shape! and last night on way home from work I could hear it blowing somewhere on the down pipe, hope the new one is not broken, just going out now to have a look see whats happened.

Good luck with the exhaust TH
 
If you want oem I would go through CDan on this forum. Just to warn you it will be fairly pricey, even with the MUD discount. I opted to go with a cheaper aftermarket down pipe and cats. They did the job but were a hastle to install.
 
Just have a custom shop build you the new system. I sourced Bosch O2 sensors and had a local shop replace everything. They cut out the down pipes and replaced all the way back (including the converters) for $441 + the O2 sensors. I did use an aftermarket cat, which may not pass visual inspection if you have emission inspections (due to there being only one).
The shop did a great job and managed to tuck everything up really well.
There are a couple of pic's here
https://forum.ih8mud.com/80-series-tech/122613-what-cat-should-i-use.html
 
Just had a local shop redo mine.
3phase cat, muffler, tail pipe, hangers, labor = $300
 
Did all of you guys go to aftermarket O2 sensors?

I just got new Toyota O2 sensors about 7 months ago so really don't want to give them up. Might look at the Slee O2 bungs?
 
The shop that did mine cut the Toyota bungs off with a plasma cutter and rewelded them into the new pipe after replacing the studs.
 
Back
Top Bottom