Engine mounts BOLT SIZES??? dropping in 2f soon...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 25, 2005
Threads
205
Messages
1,768
Location
Hagerstown MD
I've gotten my mounts from Cool Cruiser. Their shipping time was fantastic.

Problem is I need to find the proper size and length bolts, washers etc. for the front and rear mounts.
 
Come on fellers' help me out here
 
I love the OEM deal but we are talking about bolts here. I'd rather use high grade stainless steel bolts and hardware.

Anybody out there know what I need? Length, # of washers, nuts etc...
 
That I don't know
 
No, they are larger, 12mm, I think.

Ed
Do you strill need the size?
 
that would be helpful I think the front mounts are threaded. dont know much abouthe rear mounts. I have all four donuts for the rear. I guess you just put a nut on the other side? I thought the length would be different.
 
I think I used the ones off my F when I put my 2F in. There may be a change after some year though. By the way, stainless bolts aren't particularly strong, just pretty. Compared to the grade 5 bolts that are usually used they are kind of brittle. They'd probably hold up fine, but unless you are woried about corroision, or showing the thing I wouldn't bother with stainless. Get grade 8 if you are worried about strength, and when you do use stainless, put a little anti sieze on the threads if you put a stianless bolt into a stainless nut so the threads don't gall.
 
Size? thanks for the tip on the SS fasteners. I wasn't so much for the show just figured a little less rust to worry about later. Wait a minute who am I kidding?!
 
Stainless in that area is not worth the money or trouble. They can be just as difficult or worse than steel. If you do use ss there is a company that has higher strength ss hardware. I can't recall the name but I'm sure a google search will bring it up.
 
Back
Top Bottom