Engine hesitation

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 15, 2007
Threads
18
Messages
60
Location
Sacramento, CA
I came back from a day of mudding and the car ran fine from the trails all the way back to my house. Washed the body and then rinsed off the engine. Went to park it and noticed it was idling rough. took it for a spin and it wouldnt even let me pass 2500 rpm. It would choke and go down past 1000 rpm untill it would have power again. This problem happened after I rinsed the whole engine compartment, which now i think was a bad idea. It almost feels as if i dont have all the cylinders working.
 
You probably got the distributor wet. Remove the cap and dry it out. Check each wire connection.
 
do i have to go and dry it off or can i just let it sit and dry? its dark and cold outside, so working on the engine would be pretty difficult.
 
Try again in the morning, if problems persist remove and clean the dizzy/rotor.
 
Back
Top Bottom