Hey guys i have a 97 1Fz-Fe, i was installing an alarm system following a guide here on the forums.
I disconnected the factory alarm system (RS3000) and started wiring up the Viper alarm, i had almost finished besides parking light when i decided to test the remote start the only wire i had not insulated yet was the Constant 12V to the Remote Starter harness since i wanted to make sure it was the right one and i accidentally touched it to the metal underneath the steering wheel. My heart sunk when i heard the spark.
After the spark im guessing i damaged something the car wont crank or even make a click, now the clock has no power, the door locks have no power, the radio, the dash isn't marking the battery voltage or fuel.
I checked the fuses and everything seems okay i also Changed the fusible link with the spare i have and still nothing.
Any ideas???
I disconnected the factory alarm system (RS3000) and started wiring up the Viper alarm, i had almost finished besides parking light when i decided to test the remote start the only wire i had not insulated yet was the Constant 12V to the Remote Starter harness since i wanted to make sure it was the right one and i accidentally touched it to the metal underneath the steering wheel. My heart sunk when i heard the spark.
After the spark im guessing i damaged something the car wont crank or even make a click, now the clock has no power, the door locks have no power, the radio, the dash isn't marking the battery voltage or fuel.
I checked the fuses and everything seems okay i also Changed the fusible link with the spare i have and still nothing.
Any ideas???
