Electric Hubs

[BlackSmoker]

My hubs don't work. I am looking at Warn premiums P/N 28771 and do I need a nut conversion kit P/N 29918. Are these the right #'s I am going to build the 15mm spacer at work. I want too use the Warns because Lordco carrys them here in town. I like the Aisins but there expensive. Thanks

 

[killerv]

what model cruiser are you replacing hubs on?

 

[BlackSmoker]

what model cruiser are you replacing hubs on?

Sorry my cruiser is 1990 HZJ 73.

 

[oldblue]

If you have access to a Lathe, you can machine off the inner part o the inside nut [ the part that the seal runs on ] be aware that the steel is quite hard .

 

[BlackSmoker]

If you have access to a Lathe, you can machine off the inner part o the inside nut [ the part that the seal runs on ] be aware that the steel is quite hard .

I am a machinist but I don't understand which nut you are talking about? The stub axle nut? Thanks

 

[oldblue]

If all you are doing is fitting a spacer and aftermarket hubs then you don't need to alter the locking nut system.