EGR bypass question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2014
Threads
8
Messages
48
Location
Morehead City NC
Website
www.ncmartec.org
After searching many threads here on Mud in regards to the common 2F hesitation/lurching/bucking problem upon acceration, I ended up bypassing my EGR modulator. I did this by plugging the bottom hose & the single hose on top of the modulator. Man what a difference! Engine now performs so much better. More power & better mpg's. Actually has some pep now.

My question is...why is this? And is it doing more harm than good to the old 2F?
 
And is it doing more harm than good to the old 2F?

Yes.... unless you de-smog the engine correctly.
Just plugging the EGR valve only can cause detonation at higher RPMs.

The distributor advance curve is tuned (more advanced) for an EGR mixture. When EGR is removed from the air/fuel mixture, the mixture in the combustion chamber will ignite faster (and hotter) and cause the engine to ping.

The distributor ideally should be re-curved if the EGR has been disconnected.
 
Thanks for the explanation. I did notice a slight ping on the hwy today. I'm planning on a proper desmog & h55f this coming winter. Guess I'll just have to deal with the stumble until. At least I know now that she's capable of producing & have something to look forward to.
 
Back
Top Bottom