ECU replacement questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 27, 2018
Threads
30
Messages
105
Location
Colorado Springs
So as of a few days ago my 91’ cruiser desired running wasn’t something it wanted to do, after getting it towed and check out the shop believes it to be a dead ecu (he’s gonna keep looking around for other possibilities) I’ve heard on some cars that if you replace an ecu with any other one the car won’t run as the vin doesn’t match, I doubt it’s the case for these old rigs but I just wanted to ask to make sure, also any ideas on what could cause this would be greatly appreciated.
 
... I’ve heard on some cars that if you replace an ecu with any other one the car won’t run as the vin doesn’t match, ...

This is not an issue on any of the '80 series, the ECU can be swapped as needed. An ECU failure would be very rare, more common is power failure to it. With the key turned to run, is the CEL on?
 
This is not an issue on any of the '80 series, the ECU can be swapped as needed. An ECU failure would be very rare, more common is power failure to it. With the key turned to run, is the CEL on?
Not sure what the CEL is, I’ve heard it here and there but the mechanic (not a s***ty chain shop trying to scam people) said that when he checked it was getting power but nothing coming out
 
CEL = check engine light.

On some makes, ECU failure is common, so something that is routine for some mechanics. But would be a very rare occarance on an '80.
 
CEL = check engine light.

On some makes, ECU failure is common, so something that is routine for some mechanics. But would be a very rare occarance on an '80.
Oh ok, no check engine light has come on, as i don’t remember anything different in the dash cause the light does illuminate when in the on position before all of this
 
Back
Top Bottom