E-Locker harness removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 23, 2006
Threads
349
Messages
3,891
Location
The Last Best Place
So, I scored a set of axles and am in the process of removing the harness. I have everything out except the harness between the elocker computer and switch and was wondering the best way to do this. Thanks!
 
If you mean the dash harness, doublecheck your 80 as it should have those provisions as is.
Pop off the switch blank - should see the pigtail & connector there as well as the computer/relay bank over in the RH footwell behind the cover - should see it tucked slightly forward, but the connector is rectangular enough to be unique - especially with ECU in hand & looking for the socket, and the mount is in the body.
 
As long as you're installing into a 93-97 there is no need to remove that harness. You will need the one that activates the rear however. It runs the entire length of the driver side. Plenty of discussion on this if you do a search.
 
I have the computer, don't have an 80 right now, and there is no switch in the donor truck. Trying to figure out how to get that dash harness out. Thanks.
 
The wire harness you need is the ones off the locker to the first harness clip. That wire should plug right into your wire harness. Install the computer at the LF kick panel, install a fuse and install a factory locker switch in the blank knock out. That should be all you need as I recall.

Basic plug and play with the components.

Other chime as my memory has failed me before. Lol
 
Back
Top Bottom