E-brake shoe return spring (help)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2006
Threads
88
Messages
402
Location
Cincinnati, OH
I'm trying to put the two return springs that connect the top of the shoe to that middle post. I can not get those damn things back on. I even bent one of them.

I need some advice, or even better some pictures. What tool should i use, i've been trying to use needle nose visegrips. Is there a special tool i can goto autozone and buy that will work. It seems like it should have been very straight forward.

Thanks for the help.
 
there is a drum brake srping tool

13t_SpringTool.jpg


should be available at any auto parts store

you would use one of the handles in this case, it has a notch that will rest on the center post, you then hook the spring to the handle and pry, when the angle is right the spring will slide down the handle and off onto the post, easy.

you can do the same thing with a flat head screwdriver though it is a bit trickier to get it to stay on the post.

you should replace that spring.
 
shoe spring replacement

2 minute job per shoe without hand tools, attach spring to brake, hold brake pad out at an angle from backing plate, attach spring to center pin, push brake shoe back into place and hold with knee, use one hand and hold center locating pin in place, use other hand and add spring and retaining clip, now do other shoe, use are ready to add other parts. :)
 
Back
Top Bottom