DUI disty wires needed.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 25, 2005
Threads
205
Messages
1,768
Location
Hagerstown MD
This distributor has accel wires on it, (came in one of the many baskets and buckets full of parts) of course I'm missing two or three wires. I have always HATED accel-s***. I bought their stuff years ago for several different muscle cars as a kid and had terrible results.

Would factory sized wires fit? I'm curious to know what you all run, stock disty and especially HEI setups.

I have used taylor wires for some time now and have been very happy with them, I would like to use them but need to know hpw to go about getting the proper size.
 
Year and type engine?

I hear you on some of the *high performance* wires out there. Read what Magnacor says about ignition wires in the first four articles to the left on this link:
http://www.magnecor.com/magnecor1/main.htm

That was an eye opener when someone turned me onto the link. Magnecor's stuff is fairly expensive, though.
 
I just put a DUI in this weekend and went to the auto parts store in town and got a generic set of Accel 8mm spiral core wires for a V8. I had to crimp on the ends and cut to the proper length, but that is what I wanted so that I could route the wires as cleanly as possible. I know you said you didn't like the Accel stuff much, but this was a nice kit. It came with two set of ends for the wires (HEI & Non-HEI) and it came with the crimper ends for a crimping tool. Since I didn't have the tool I took one end and put in a vice and used a hammer to tap down the other. Perfect crimps on each wire! All for under $50.
 
I use Jacobs and have had them for some time. Great wires. Don't know how they are since accel bought them out.
 
Back
Top Bottom