Dual battery help

[AndrewHadji]

Hey folks ....

Need a sanity check... planning out the dual battery wiring. need opinions

this is what i am thinking

battery1
starting
winch
spots
floods
backup\rack floods

battery2
stereo amp
fridge
cb
2meter radio
inside fusebock

would you change anything around?

 

[ForealBoreal]

I know you have a 12V system.

What I would change is the CB, 2M Radio to just hook up to the inside fuse block.
Could do the amp too but I don't know what kind of amps that thing is drawing.

With my 24v system I hooked up a switched 24v block where I power my HIDs, LED bar and Redarc.

 

[AndrewHadji]

Sorry i wasn't verbose enough. Ill try to paint a clearer picture. You are correct, they will be hooked up like that, still in the planning phase.

Battery 1
++starting
++winch
++6 fuse block (4 gauge from battery)(short run so 4 gauge should be enough, less than 4 feet to battery)
+++spots
+++floods
+++backup\rack floods

Battery 2 (0 gauge to somewhere in the rear to a breakout: 300 amp breaker at battery)
++breakout stud
+++stereo amp (4 gauge 100 amp breaker to breakout)
+++12 fuse block (4 gauge 100 amp breaker to breakout)
++++fridge
++++cb
++++2meter radio
+++Inverter (<1000 watts) (4 gauge 100 amp Breaker to breakout)

 

[AndrewHadji]

everything comes in this week.

Its going to be a real push to get everything done by the end of April.....