Dual batteries

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 9, 2005
Threads
71
Messages
255
Location
sykesville,md
Which set up is best for 2 batteries? I have a Warn 8274 8000# winch, which puts a hurting on my battery and a 140 amp alt. Sould I hook up 2 batteries in phase, should I get a manual battery selector switch or purchase a dual battery marine grade charger. I have also seen dual battery kits that come with what looks lika a soleniod. Any ideas out there? thanks
 
I've run dual batteries with an isolator for some time.
No problems. There are several approaches as the other posts
notes. Let us know what you choose to use.

c&p from above link: I couldn't have said it better


However, for most people, I think that a simple single alternator, dual battery system
would work perfectly fine. I recommend using a high output alternator in place of the
fairly weak stock 60 amp unit and using 2, very high quality batteries, such as the Optimas.
An Isolator, in between the batteries will ensure that you always have one good battery to
start the truck, should the main battery fail. A switch could be hooked between the
batteries, should it become necessary to use both for winching.
 
Dual Battery

I run 2 identical batts in parallel, connected via a heavy duty high current continous duty solenoid. The solenoid is energised via a manual switch in the cab. All 12v accy are wired to #2 battery via a fuse panel. 12v source is via ignition on circuit.

JB
 
Back
Top Bottom