door sensor help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 3, 2008
Threads
25
Messages
73
hi ya 1994 unlocked stock glock stickered 80, drivers door sensor, the one that triggers alarm is stuck, sorta, my door is ajar light is on therefore one cant lock the rig without the alarm sounding off, any thoughts or ideas, thanks, can you by pass this thing:steer:
 
I just took my door sensor apart on my 62. if it's a simialr design, the plastic inner rod pushes the back of the switch out of contact with the wire coming out of the back of the switch.

I just unscrewed my switch from the door jamb and cleaned and lubed the wire and the end of the plastic rod that attaches to the wire. I also had to wire brush a little rust off of the threaded insert in the door so the metal housing of the switch made good contact to ground. Put it back together and now my light works properly. Took 5 minutes. I hope yours is as simples.
 
Unplug the horn - very short term fix. Long term you need to order a new switch from Cdan (a good time to order other stuff too) or hit the junk yard and pull a good switch.
 
Back
Top Bottom