Door lock cylinders

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 14, 2005
Threads
41
Messages
531
Location
Iceland
I cant unlock the driver door with my key any more. The only goes half way in and doesnt turn.

Do you know if the cylinders in the drivers and passanger doors are changeble?

It looks quite silly opening the passanger door, climb in, unlock the drivers door, climb back out and get inside on the right side ;)
My neigbours made jokes of my this morning ;)

This is a 1990, hdj 81
 
Lube is the first try. I have worked on Jap locks, but you can't really drop by to have me help out. It is a bit of a drive from Iceland.
Lube it good, as in until lube runs out the bottom of the door if you have to. Hose it real good. Then wiggle the key up and down to see if it can work.
If that doesn't work you are dealing with wear on the lock tumblers.
If you remove the lock assembly you can take the cylinder out of the lock. Remove the snap ring at the back of it and slide the center out with the key inserted.
Look at each of the "tumblers". One or more of them will be worn so that it protrudes too far to let the cylinder turn smoothly. Just file that one or ones down until it turns smoothly. Lube the hell out of it and put it back together.
The drivers' lock is the highest wear lock on the truck. Mine is sticky, as is most everybody else's.
I moved to a low-crime area where I don't always have to lock the truck. But I still need to think about how long it will be before I have to buy and rekey a lock for my drivers' door. I don't know of any place to get tumblers for Japanese locks. I get them by saving parts from other locks. Someone may be able to correct me on this.
Japanese locks are supposed to be some black art, but I find them simple. It is just a matter of trying until you get it right.
 
After only modest results with a variety of high end lock lubes over the years I ran out of patience one day last year and fired some PB Blaster in mine. No exaggeration - instantly started working smoothly. Guess it needed more of a slap than a gentle hint.

DougM
 
Back
Top Bottom