different years with same parts.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 23, 2008
Threads
85
Messages
1,231
Location
Long Beach, CA
Correct me if I am wrong.

Landcruser FJ80 had same parts from 1991 to 1997.

Lexus LX450 had same parts from 1996 to 1997.


AND most FJ80 parts, from all years above, will be the same as the LX450.....?


Thanks guys in advance, I'm trying to get some door handles and other misc. items and want to know what years I can get the correct items
 
Gosh, what a can of worms you've opened. For starters, they have completely different engines during those years---and on, and on, and on.
 
Correct me if I am wrong.

Landcruser FJ80 had same parts from 1991 to 1997.

Lexus LX450 had same parts from 1996 to 1997.


AND most FJ80 parts, from all years above, will be the same as the LX450.....?


Thanks guys in advance, I'm trying to get some door handles and other misc. items and want to know what years I can get the correct items

Not quite... There are some differences between different years.

1991-92 used the 4.0L 3FE engine
1993-97 used the 4.5L 1FZ-FE engine (including 96-97 LX450)

Adjustable intermittent wiper blades were introduced in 1992.

ABS, rear disc brakes, and full-floater rear axle were optional 1993-94, became standard in 95. F/R diff locks were optional 1993-97.

Headlight, grille,and dash styles changed in 1995; the LX450 headlight/grille style is completely different.

I would think that the door handles are all the same...

HTH
 
Well I just went to AutoZone and Napa looking for a front axel/knuckle rebuilt kit. Both places looked at me like I was crazy.

I saw some post about Cdan... is there a website where I can order this stuff?

Need:
a front drivers door handle assembly
front axel rebuild kit
the rubber boot connecting the air-intake ducts
front passenger headlight assembly

Its for a 1996 Lexus LX450, but it should all be the same as Toyota with the exception of the headlight I believe,.....
 
CDan, aka CruiserDan, is a member here and is the parts manager for American Toyota in Albuquerque, NM. He gives a generous discount to 'Mud members.

You can contact him at 1-800-432-6668, ext. 8
 
Well I just went to AutoZone and Napa looking for a front axel/knuckle rebuilt kit. Both places looked at me like I was crazy.

I saw some post about Cdan... is there a website where I can order this stuff?

Need:
a front drivers door handle assembly
front axel rebuild kit
the rubber boot connecting the air-intake ducts
front passenger headlight assembly

Its for a 1996 Lexus LX450, but it should all be the same as Toyota with the exception of the headlight I believe,.....

The door handle will be pre-painted, so depending on the colour of your LX there may not be a direct Toyota match.
 
thanks fellas.

I'm picking up my LX450 tomorrow morning, I SO excited! The salvage yard just called and said the paperwork is ready.

I sent Cdan a PM, I'm sure he'll get back to me soon, sounds like a great guy.

Hopefully I can get the parts quick and get this thing ready for Thanksgiving weekend. Going to the desert!

as for the door, handle, I'm not too concerned with color, my rig is black and I can just color match it if I had to.

I'll probably go by the Lexus dealership this afternoon and check on service history. Possibly get that rubber boot today, the car dosent run right without it, I think it has something to do with the air sensor near the air filter.....
 
Is this by chance the infamous intake tube?


I dunno,

there is a plastic intake hose leading from the air filter box towards the engine intake. It is a 2-piece plastic intake I believe. At the mid-point of the tube there is a rubber elbow made of rubber, its all cracked and desroyed....

why do u say "infamous"....?
 
thanks fellas.

I'm picking up my LX450 tomorrow morning, I SO excited! The salvage yard just called and said the paperwork is ready.

I sent Cdan a PM, I'm sure he'll get back to me soon, sounds like a great guy.

Hopefully I can get the parts quick and get this thing ready for Thanksgiving weekend. Going to the desert!

as for the door, handle, I'm not too concerned with color, my rig is black and I can just color match it if I had to.

I'll probably go by the Lexus dealership this afternoon and check on service history. Possibly get that rubber boot today, the car dosent run right without it, I think it has something to do with the air sensor near the air filter.....

Lucky for you black is the same colour code for the LX and the LC. So a Toyota handle will be the same colour as your Lexus.

You can also check out www.toyodiy.com/parts to look up parts and compare the numbers between model years. HTH!
 
I dunno,

there is a plastic intake hose leading from the air filter box towards the engine intake. It is a 2-piece plastic intake I believe. At the mid-point of the tube there is a rubber elbow made of rubber, its all cracked and desroyed....

why do u say "infamous"....?

Ah. :lol:

"Infamous", because it's a common point of failure. Cracks and such in that tube allow unmetered air into the engine, causing it to run lean and crappy.

Don't worry, we've all been through it. Duct tape is a good temporary fix.
 
Back
Top Bottom